CAN Standart Basic

Creating your Project

In this tutorial, you will learn how to set up a basic CAN (Controller Area Network) project on a...

Project Assembly Steps

2.1 Main Block: CAN Controller (can_controller_std) The can_controller_std is the heart of the s...

Project Simulation

Before programming the FPGA, it is recommended to run a simulation to verify if the system is wor...

FPGA Synthesis and Programming

After confirming the simulation, proceed with synthesis and FPGA programming: 1. Open the Synthe...

Hardware Validation

After programming the FPGA, it’s time to validate CAN communication and UART output in the physic...

Wrapping Up

Congratulations! You have successfully created a basic FPGA CAN network project in ChipInventor. ...