Configuring and Testing the ALU
Now, you have to configure and test if your project is working the right way.
-
Go to the Blocks tab to configure the tests.
-
Add the necessary basic blocks:
-
Inputs: Add two blocks to represent the operands x and y.
-
The input name must be the same as the block ports. (x[15:0], y[15:0], zx, nx, zy, ny, f, no)
-
Outputs: Add blocks to visualize the results of the operations.
-
The output name must be the same as the block ports. (out[15:0])
Connect the ALU outputs to the output blocks to capture the results.
