Building the MUX Circuit in the Blocks Tab

Now, follow these instructions to build your circuit:

1.

1. Go to the Blocks tab to design your circuit.

2.

2. From the left menu, drag the following blocks to the workspace:

• Input: Add three blocks to represent two data inputs and one selection input.

• Output: Add one block to represent the circuit’s output.

• AND: Add two blocks.

• NOT: Add one block, named as INVERTER.

• OR: Add one block.

3.

3. Connect the blocks as shown below:

4.

4. Name the variables:

• Data Input 1: D0.

• Data Input 2: D1.

• Selection Input: S.

• Output: Y.

5.

5. Click Save to save your project.