Distance Sensor
Creating your Project
Distance Measurement Project with HC-SR04 Ultrasonic Sensor and UART Transmission in ChipInventor...
Understanding the Project and the Blocks Used
This project uses the following main blocks, as shown in the image: HC_SR04: A block that ma...
Connecting the Blocks
The image shows the following configuration of blocks and connections: HC_SR04 Block Inputs...
Project Simulation
Before programming the FPGA, you can simulate the circuit behavior: Click on the Simulate ta...
FPGA Synthesis and Programming
Once the simulation is validated, proceed with synthesis and programming: Click on the Synth...
Hardware Validation
After programming the FPGA, you can test the system: 1. Access the Main tab. 2. Click on Serial...
Wrapping Up
Congratulations! You have created a complete distance measurement system using the HC-SR04 ultras...