Recorder

If you want to reprogram (re-flash) the same design without making any changes (no new synthesis required):

1. Click on Recorder in the ChipInventor top menu.

2. Choose a Project: Select your latest or most recent project.

3. Click Connect if your board is not already connected.

4. Click Flash to record the FPGA with the same bitstream.

Note: If you have made design changes (e.g., altered any blocks or parameters), you must re-synthesize the project before flashing again.

Advantages:

• Saves time by skipping the Synthesis step when there are no design changes.

• Allows quick re-flashing of the existing bitstream for testing or demonstration purposes.