RISC-V Education
Creating Project
In this tutorial, you will learn how to develop a basic RISC-V project within the ChipInventor pl...
Understanding the Project and the Blocks Used
Below are the main blocks that make up our RISC-V project, in a structure similar to the previous...
Connecting the Blocks
To assemble your project in the ChipInventor block diagram: 1. Drag each block (e.g., franken_ri...
Project Simulation
Before programming your FPGA board, validate the RISC-V operation in simulation: 1. Click Simula...
FPGA Synthesis and Programming
After confirming your simulation is correct: Go to the Synthesize tab. Select Start Syn...
Hardware Validation
With the FPGA programmed, proceed to practical testing: If you use an external clock, ensure...
Wrapping Up
Congratulations! You have built a basic RISC-V project in ChipInventor. This process included: ...