UART Protocol
Understanding the UART Protocol
UART (Universal Asynchronous Receiver-Transmitter) is a widely used asynchronous serial communica...
Creating Your Project in ChipInventor
In this tutorial, you will create a serial communication system using UART with three main blocks...
Blocks Used in the Project
The project uses the following blocks based on the provided Verilog modules: uart_rx: Respon...
Connecting the Blocks
Assemble the project with the following configuration: uart_rx Block Inputs: clk → system ...
Project Simulation
Go to the Simulate tab in the top menu. Select Advanced Simulation. Click on Run Iv...
FPGA Synthesis and Programming
Once the simulation is validated: 1. Go to the Synthesize tab. 2. Click Start Synthesis. 3. Co...
Hardware Validation
1. Access the Main tab. 2. Click on Serial Console. 3. Set the baud rate to 115200. 4. Send a ...
Wrapping Up
Congratulations! You’ve implemented a complete UART system with receiving, comparison, and data e...