ADC Buzzer Alarm - Tang Nano 9k
Creating your Project
In this tutorial, you will learn how to configure a project that reads analog data from an ADC vi...
Understanding the Project and the Blocks Used
The basic diagram of this project consists of reading data from an ADC (Analog-to-Digital Convert...
Connecting the Blocks
The diagram below illustrates how the blocks can be connected (this example follows the organizat...
Project Simulation
a) Steps to Simulate: 1. Access the Simulate Tab: Open the ChipInventor software and navigate...
Synthesis and FPGA Programming
After verifying the simulation: Click on the Synthesize tab. Select Start Synthesis to ...
Hardware Validation
After programming the FPGA, it’s time to test the system in practice. 1. ADC Connection Mak...
Wrapping Up
Congratulations! You have created a complete system for reading analog values via an ADC (I2C) in...